|
 The Machine Room-Less hydraulic lift with special advantages. Space saving and flexible for the smallest shaft.
Arion Hydro MRL is a pioneering concept, combining ideally the well-known advantages of a quality hydraulic lift, with the elimination of the requirement for a machine room.
The advantages of Arion:
• 4 weeks delivery
• Type Examination Certificate according to Directive 95/16 EC
• Travel up to 20m / 8 stops for 630 Kg, 25m / 10 stops for 1000 Kg
• Controller installed at the lowest landing level
• Optional use of a soft starter
• Environment-friendly
• HR version at 1 m/sec available as well in shaft sizes of
• 1,65m wide x 1,80m deep with 900mm wide door or
• 1,60m wide x 1,80m deep with 800mm wide door
• Reduced Headroom at 3400 mm
• Only 1100 mm min. pit depth for 630 Kg, 1400 mm for 1000 Kg
• With minimized shaft dimensions suitable for new construction and modernization
• Available with various cabin sizes and panoramic cabins
• Reduced installation time
• A solution of superior value
Hydraulic Elevation System:
• Manufactured with high quality materials that secure long life span
• Installation and service friendly parts
• High levelling and stopping accuracy according to pr EN 81.70 that provides ride quality
• Minimum maintenance requirements, low maintenance costs and readily available spare parts
• Compatible also with biodegradable and non flammable oil
Controller- Electronics:
• The controller is placed at the lowest stop, next to the landing door and outside the shaft.
• Easiest access to the controller
• State-of-the-art electronics
• Pre-assembled electrical installation (fully pre-wired)
• Available with standard Automatic Emergency Evacuation
Valve block - Power unit:
• The power unit is placed in the shaft
• Through the "Moving Valve Block" concept, access to the valve block is as easy as it gets!
| |
ARION 600 LR |
ARION 600 HR |
ARION 1000 |
| Rated load (kg) |
630 |
630 |
1000 |
| Max travel (m) |
14 |
20 |
25 |
| Number of stops |
6 |
8 |
9 |
| Max. Speed (m/sec) |
0.64 |
1.0 |
1.0 |
| Min. Pit Depth (mm) |
1100 |
1200 |
1400 |
| Min. Headroom (mm) |
3400 |
3400 |
3400 |
| Max. Load on piston (kg) |
2650 |
3200 |
4600 |
| Sling weight (kg) |
220 |
220 |
250 |
Max. cabin weight incl.
cabin doors (kg) |
440 |
700 |
1000 |
| Cabin sling |
LSF 1600 with diagonal girder |
LSF 1600 with diagonal girder |
LSF 2200 with diagonal girder |
| Pulley |
PL - 400 |
PL - 400 |
PL - 400 |
| Guide rails |
T89x62x16 |
T89x62x16 |
T90x75x16 |
| Max. ram |
Ø 90 massive |
Ø 120x9 |
Ø 150x12 |
| Wire ropes (mm) |
4 x Ø 10 (70.2 KN) |
4 x Ø 10 (70.2 KN) |
5 x Ø 10 (70.2 KN) |
| Max vertical distance between guide brackets (mm) |
1500 |
1500 |
1200 |
| Oil tank capacity (Lt) |
270 |
325 |
480 |
| Max pump capacity (Lt) |
125 |
210 |
300 |
| Rubber hose (power unit-cylinder) |
R1A 1" |
R1A 1 ¼" |
R1A 1 ½" |
| Valve block |
EV-100 ¾" |
EV-100 1 ½" |
EV-100 1 ½" |
| Soft starter (optional) |
RST (ESB-LC-1) |
RST (ESB-LC-1
and -2) |
RST (ESB-LC-1
and -2) |
Return to Goods Passenger Lifts > |
